Sealing Ring For Flange/Drive Shaft on Rear Final Drive (Final Drive Removed), Replacing

Sealing ring for flange/drive shaft on rear final drive (final drive removed), replacing





Special tools, testers and auxiliary items required
^ Holding plate VW 309
^ Transmission support VW 353
^ Transmission holder V.A.G 2004
^ Extractor lever VW 681
^ Thrust piece T10019
^ Torque wrench V.A.G 1601

Transmission Support VW 353, modifying





For mounting rear final drive, transmission support VW 353 must be modified on assembly stand.

Dimensions given are in mm.

- Inscribe bore - arrow 1 - corresponding to illustration.
- Bore a hole of 13 mm diameter - arrow 1 - into transmission holder.
- Enlarge bore - arrow 2 - to 13 mm diameter.