Differential Lock Hydraulic Fluid Filter: Service and Repair

Oil filter for Haldex clutch, replacing

Special tools, testers and auxiliary items required





^ Wrench T10066

Removing
- Place drip tray underneath.





- Use key T10066 to loosen and remove oil filter.

Installation position: The oil filter - A - is located on right side of vehicle, concealed by subframe, near front mounting bracket - B -.

Installing
- Lightly coat O-ring of new oil filter with oil for Haldex clutch.
- Install oil filter - A - and tighten to 35 Nm using Key T10066.
- Check oil level in Haldex clutch, change oil level in Haldex clutch if necessary.