Windshield Washer Spray Nozzle: Service and Repair

Spray Jets, Removing And Installing

Removing
- Disconnect electrical connections for spray jet heaters.
- Remove plenum cover and wiper arms.
- Separate washer hose from plenum cover where applicable.







- Push jet -1- in direction of -arrow1-.
- Lift jet from cover -arrow2- and remove.
- Disconnect washer hoses from cable ties and pull off from jet.

Installing
Install in reverse order of removal, noting the following:

NOTE:
- Ensure washer hose couplings engage audibly when reinstalling.
- Replace all remove cable ties.
- Set wiper blade park position.