Main Fuse Panel, Removing and Installing

Main Fuse Panel, Removing And Installing

CAUTION:
Before beginning repairs on the electrical system:
- Obtain the anti-theft radio security code.
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
- Disconnect negative ( - ) battery terminal.
- When reconnecting battery terminals, observe all applicable Notes and torque specifications, as well as instructions on performing OBD program and electrical system function checks as specified.

Removing
- Disconnect battery.







- Open cover -1-.
- Remove nuts -2... 7-.
- Disconnect electrical connection -8- and move to side.







- Unclip main fuse box from mount -arrow-.
- Remove fuse box for main fuse.

NOTE: Individual fuse assignments







Installing
Install in reverse order of removal, noting the following:
- Reconnect battery.

Tightening torque

Wire terminals to fuse box 6 Nm