On-Board Diagnostic (OBD), Technical Data

On Board Diagnostic (OBD), Technical Data

Equipment
- The data transfer between the control module and vehicle diagnostic, testing and information system VAS 5051 is carried out in the "Self-diagnosis" mode.
- The Diagnostic Trouble Code (DTC) memory is equipped with a non-volatile memory and therefore does not depend on the power supply.
- Faults relating to the electronic throttle are also indicated by the EPC warning lamp in the dash panel insert (EPC = electronic power control).
- If the engine control module recognizes faults which cause higher exhaust emissions, these faults are indicated by the Malfunction Indicator Lamp (MIL) -K83- in the instrument cluster. Malfunction Indicator Lamp (MIL) -K83- In Instrument Cluster

Significance of the Malfunction Indicator Lamp (MIL) -K83-. Malfunction Indicator Lamp (MIL) -K83- In Instrument Cluster
- The readiness code must be re-generated each time the Diagnostic Trouble Code (DTC) memory is erased. Generate Readiness Code