Engine, Attaching to Engine Stand

Engine, attaching to engine stand

Before performing repair work, attach the engine to support clamp VW 313 with engine and transmission support VW 540.

Work sequence

- Unbolt transmission.





- Engage lifting tackle 2024A with retainer 3180 as shown in illustration and lift engine off engine/transmission jack V.A.G. 1383A using workshop crane V.A.G. 1202A.

Pulley end:

^ 2nd hole on support bar in position 1

Flywheel end:

^ 3rd hole on support bar in position 5

CAUTION
Always use split pins to secure hooks and retainer pins.





- Secure engine to engine/transmission support VW 540 and fit to support clamp.