Seat Height Adjustment Unit, Removing

Seat Height Adjustment Unit, Removing

- Removing:
- Remove seat.
- Remove seat height adjustment handle.
- Remove seat side trim.
- Remove seat cushion.







- Disengage nipple - 3 - at lever.
- Disengage Bowden cable - 5 - at adjuster wheel - 2 -
- Push through pins - 4 - (3x) from outside.
- Take out seat height adjustment unit - 1 -.

- Installing:







- Attach nipple - 3 - to lever.
- Wrap cable around guide roller.
- Engage Bowden cable - 5 - at adjuster wheel - 2 -.
- Turn adjuster wheel - 2 - until cable makes contact with idler roller.
- Attach height adjustment handle.
- Actuate height adjustment handle. Gas-filled strut should release at approx. half-way point. If necessary, reset adjuster wheel - 2 -.