Head Restraint Cover and Padding, Removing and Installing

Head Restraint Cover And Padding, Removing And Installing







- Remove head restraint.

- Removing:
- Use screwdriver to pry fastening strip - 2 - out of guide slot - 1 -.







- Remove head restraint mount - 1 - from padding - 2 -.
- Remove padding - 2 - from cover - 3 -.

- Installing:
- Insert padding - 2 - in cover - 3 -, making sure it is correctly aligned.
- Insert head restraint mount - 1 - in padding - 2 -.
- Press fastening strips firmly into guide slot (pull to check).