Erase DTC Memory (Scan Tool Function 05)

Erase DTC Memory (Function 05)

NOTE: If the DTC memory cannot be erased, check the DTC memory again and repair any malfunctions.

Prerequisites
- DTC memory checked. Check DTC Memory (Scan Tool Function 02)
- All malfunctions repaired

After DTC memory has been successfully checked:

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.

Indicated on display

Rapid data transfer Q
05 - Erase DTC memory

- Confirm entry with the -Q- button.

Indicated on display

Rapid data transfer ->
DTC memory is erased!

The DTC memory is now erased.

- Press -> button.

Indicated on display

Rapid data transfer HELP
Select function XX

NOTE:
- If this message appears in the display, the test sequence has not been performed correctly.
- If this message appears in the display, the test sequence has not been performed correctly.

Keep exactly to test sequence: First Check DTC Memory, if necessary repair malfunctions, then erase.