Diagnostic Trouble Code (DTC) Memory, Checking (Function 02)

Diagnostic Trouble Code (DTC) Memory, Checking (Function 02)

NOTE: The displayed DTC information is updated only when initiating OBD or with "Erase DTC Memory" function 05.

- Initiate On Board Diagnostic (OBD) of immobilizer. Anti-Theft Immobilizer on Board Diagnostic (OBD), Initiating







Display on VAS 5051/5052:
- In selection -1-, click on the diagnostic function "02 - Check DTC Memory".







Display on VAS 5051/5052:
1 - DTC memory content:
- 0 malfunctions recognized
or
- X malfunctions recognized
2 - Diagnostic Trouble Code (DTC)
- DTC
- malfunction location
- malfunction type

If malfunctions were recognized:
- Print out Screen content or On Board Diagnostic (OBD) protocol:
See Operating instructions for the VAS 5051/5052 tester
- Press < - button







Display on VAS 5051/5052:
- Repair malfunction(s) according to DTC table Anti-Theft Immobilizer, On-Board Diagnostic (OBD)
- In selection -1-, press diagnostic function "02 - Check DTC Memory" again and Erase DTC Memory
Diagnostic Trouble Code (DTC) Memory, Checking (Function 02)
Diagnostic Trouble Code (DTC) Memory, Erasing (Function 05)
- In selection, click on diagnostic function "06 - End Output" End Output (Function 06)

If no malfunction was recognized:
- In selection -1-, click on diagnostic function "06 - End Output" End Output (Function 06)