Torque Converter Oil Seal

Torque Converter Oil Seal

Special tools, testers and auxiliary items required

• Extractor lever (VW681)

• Thrust piece (3295)

Removing

- Removing transmission. Refer to => [ Transmission, Removing ] Transmission, Removing.

- Secure transmission to assembly stand. Refer to => [ Transmission, Attaching to Assembly Stand ] Transmission, Attaching to Assembly Stand.

- Insert extractor lever (VW681) directly behind the sealing lip of the sealing ring, so that the contact ring which is behind it is not damaged.





Installing

- Insert contact ring.

- Coat outer circumference and sealing lips of sealing ring with ATF.

• Installation position: The open side of the sealing ring faces the transmission.

- Using thrust piece (3295), drive in sealing ring for torque converter up to thrust piece stop.