Central Valve and Bolted Connections to Suspension Struts

Central Valve and Bolted Connections to Suspension Struts





1 Right front and left rear central valve

• Central valve is installed in direction of travel at left

2 Hex nut

• 23 Nm

3 Left rear wiring harness shut-off valve

4 Right front wiring harness shut-off valve

5 Hex nut

• 23 Nm

6 Left front wiring harness shut-off valve

7 Right rear wiring harness shut-off valve

8 Left front and right rear central valve

• Central valve is installed in direction of travel at right

9 DRC line to right rear shock absorber

• 19 Nm

10 DRC line to left front suspension strut

• 19 Nm

11 DRC line to right front suspension strut

• 19 Nm

12 DRC line to left rear shock absorber

• 19 Nm

13 Shut-off screw

• To shut off, turn clockwise to stop

• To open, turn counter-clockwise to stop

14 Lock nut

• 12 Nm

Front suspension strut

Tightening specifications:





• When fastening item - 2 -, make sure lug is seated properly in bracket.

- 1 - Tightening specification: 19 Nm

- 2 - Tightening specification: 19 Nm

Rear shock absorber

Tightening specifications:





• When fastening item - 2 -, make sure lug is seated properly in bracket.

• When tighten, item - 2 - must be counterheld at connection block - 3 -.

- 1 - Tightening specification: 19 Nm

- 2 - Tightening specification: 19 Nm