Wiring Harnesses and Connectors

Wiring Harnesses and Connectors

CAUTION!
Before beginning repairs on the electrical system:

• Where applicable, obtain anti-theft radio security code.

• Switch off all electrical consumers.

• Switch the ignition off and remove ignition key.

• Disconnect negative ( - ) battery terminal.

• On vehicles equipped with Audi Telematics by OnStar(R), switch-off the emergency (back-up) battery for the Telematic/Telephone Control Module prior to disconnecting vehicle battery.

• After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Information and/or Owner's Manual.

• After reconnecting vehicle battery on vehicles equipped with Audi Telematics by OnStar(R), switch-on the emergency (back-up) battery for the Telematic/Telephone Control Module

Special tools, testers and auxiliary items required

• Wiring harness repair set (VAS 1978)

• Wiring harness and connector repairs on the vehicle electrical system are only to be performed using wiring harness repair set ( VAS 1978).





• An instruction manual is included in the wiring harness repair set (VAS 1978), in which the procedure for repairs is described in detail.