Clutch Pedal Switch

Clutch Pedal Switch

• In order to guarantee sufficiently secure seating, the Clutch Pedal Switch (F36) may only be installed once.

Removing

- Remove storage compartment on driver side.

- Disconnect connector - 1 - on the clutch pedal switch.





• Clutch pedal - 3 - is in rest position (not actuated). The Clutch Pedal Switch (F36) plunger - arrow - must touch clutch pedal.

- Release Clutch Pedal Switch (F36) - 2 - by turning it to the left 45° and pulling it from the guide.

Installing

Install in reverse sequence; note the following points:

- Now, before installing Clutch Pedal Switch (F36 ), push plunger - arrow - in completely.





• The clutch pedal must remain in rest position (not actuated).

- Guide the Clutch Pedal Switch (F36) through the installation opening, press it against the clutch pedal and secure it by rotating it 45° to the right.





- Connect Clutch Pedal Switch (F36) connector.

- Install storage compartment on driver side.