01X Transmission

Back Up Lamp Switch

Special tools, testers and auxiliary items required

• Torque wrench (VAG 1331)

Removing





- If installed, loosen quick release fasteners - 3 - and remove rear sound insulation - B -.

- Disconnect electrical connector - arrow - for back up lamp switch (F4) on transmission (right side).





- Remove back up lamp switch (F4) from selector shaft cover - arrow -.





Installing





- Install back up lamp switch (F4) into selector shaft cover - arrow -.

- Attach electrical connector - arrow - for back up lamp switch (F4) on transmission (right side).