01VA Transmission

Shift Lock Solenoid

Removing

- Remove shift mechanism cover. Refer to => [ Shift Mechanism Cover ] Shift Mechanism Cover.

- Disconnect electrical harness connector on Shift Lock Solenoid (N110).

- Release lugs and remove selector lever lock solenoid forward (arrows).





Installing

Installation is reverse of removal, noting the following:

- Press selector lever lock solenoid into guide until it engages; actuating lever - 2 - of solenoid must engage in locking lever - 1 - on shift mechanism.





- Install shift mechanism cover. Refer to => [ Shift Mechanism Cover ] Shift Mechanism Cover.