Microswitch For Variable Convertible Top Compartment, Removing and Installing

Microswitch For Variable Convertible Top Compartment, Removing And Installing

- Remove variable convertible top compartment.







- Pull carpet - 1 - back (convertible top compartment lining) on right side until both bolts 2 - are accessible.
- Bond carpet with D 001 200.
- Remove bolts - 2 - (2x).
- Tightening torque 4 Nm
- Detach convertible top compartment center section - 3 - from right side section - 4 -.







- Pull side sections - 1 - and - 2 - apart.
- Remove bolts - 3 - (4x) from inner lid.
- Tightening torque 2 Nm
- Detach inner lid - 1 -.
- Carefully drill off microswitch weld on outside.







- Remove microswitch - 1 -.
- Installing
- Attach new microswitch - 1 - using soldering iron on outside.
- Installation is in reverse order of removal.