Convertible Top Compartment Cover Lock, Removing and Installing

Convertible top compartment cover lock, removing and installing







Removing
- Bring convertible top into center position.
- Remove convertible top compartment well front trim.
- Mark position of Convertible Top Compartment Cover Locking Motor V222 before removal.
- Remove securing spring from ball socket and press push rod of ball stud (version 1) or remove securing clips and press push rods from guide pins (version 2).
- Disconnect electrical connector.







- Remove screws - arrows -.
- Remove Convertible Top Compartment Cover Locking Motor V222 / Convertible Top Compartment Latch Switch (unlock) F293.

Installing
- Secure motor according to markings applied earlier and tighten bolts.