Ribbed Belt Pulley With Free-Wheel, Removing and Installing

Ribbed Belt Pulley With Free-Wheel, Removing And Installing

Special tools, testers and auxiliary items required







- Adapter 3400







- VAG 1332 Torque wrench (or 40 - 200 Nm equivalent)

Removing
- Remove generator:
- 4-cylinder engine.
- 6-cylinder engine
- Press protective cap off of generator pulley.






- Counterhold belt pulley using adapter 3400 and turn generator shaft clockwise to loosen.

Installing
Install in reverse order of removal, noting the following:
- Turn generator shaft anti-clockwise to tighten.
- Clip protective cap onto generator pulley.

Tightening torque
Ribbed belt pulley with free-wheel to generator - nut: 80 Nm