Diagram 92/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Safety Belt Switch, Power Supply Relay (terminal 15)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E24 - Driver's Safety Belt Switch Locations

E25 - Front Passenger's Safety Belt Switch Locations

G452 - Seat Occupied Recognition Pressure Sensor Passive Occupant Detection System

G453 - Seat Occupied Recognition Safety Belt Force Sensor Locations

J234 - Airbag Control Module Control Modules in Interior Of Vehicle

J329 - Power Supply Relay (terminal 15) Overview Of Relay

J519 - Vehicle Electrical System Control Module Control Modules in Interior Of Vehicle

J706 - Seat Occupied Recognition Control Module Passive Occupant Detection System

T2at - Double Connector, black, below driver's seat

T5g - 5-Pin Connector, black, below front passenger's seat

T8h - 8-Pin Connector, black (Connector F)

T11c - 11-Pin Connector, brown (Connector D)

T12e - 12-Pin Connector, black (Connector G)

T40 - 40-Pin Connector, black, on electronics box engine compartment (Connector J)

T75 - 75-Pin Connector, yellow (connector locking green)

(366) - Ground Connection 1 (in main wiring harness)

(374) - Ground Connection 9 (in main wiring harness)

(412) - Ground Connection 3 (in power seat wiring harness)

* - Only models with seat occupied recognition

Previous Diagram 92/4 (Tracks 29-42)

Next Diagram 92/6 (Tracks 57-70)