Rear Suspension

Vehicle level sensor in vehicles with automatic headlight vertical aim control





For vehicles with all wheel drive
1 - Subframe

2 - Bracket

3 - Upper transverse link

4 - Coupling rod

5 - Self-locking nut, 4 Nm
^ Always replace if removed

6 - Lower transverse link

7 - Clamp (mark position of clamp)

8 - Rivet
^ Replaced by self-tapping screw
^ Tightening torque: 9 Nm

9 - Left Rear Level Control System Sensor - G76 -
^ Is tested electrically via self-diagnosis
^ Do not remove coupling rod from ball head