Left Front Level Control System Sensor -G78-, Removing and Installing

Left Front Level Control System Sensor -G78-, Removing And Installing

Removing (front-wheel drive and all-wheel drive)

CAUTION:
Before beginning repairs on the electrical system:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.

The sensor is mounted above the front axle at the control arm.







- Remove nut -4- and detach linkage.
- Sensor -1- is mounted to the securing bracket -3- at vehicle.
- Remove sensor and securing bracket by removing both nuts -2-.
- Disconnect harness connector.
- By removing both socket head bolts (3mm) at level control system sensor, it can be removed from the securing bracket -3-.

Installing
Install in reverse order of removal.