Glove Box Lamp Switch: Service and Repair

Glove Compartment Light (Switch) -W6-, Removing And Installing

CAUTION:
Before beginning repairs on the electrical system:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.

Special tools and equipment required







- Hook 3370

Removing
- Enure light switch to -0- position.
- Open glove box if necessary.







- Use hook 3370 to remove right instrument panel end trim -arrow-.







- Depress both release tabs -arrows 1- and pull switch out of guide at glove box -arrow2-.
- Disconnect electrical connections.

Installing
Install in reverse order of removal of removal.