Glove Box Locking Mechanism, Removing and Installing

Glove Box Locking Mechanism, Removing And Installing







- Remove screws - 1 - (6x), tightening torque 1 Nm.
- Pull out cover - 2 - in direction of - arrow -.







- Use screwdriver to pry out linkage - 1 - (2x) at guides - 2 -.
- Pull linkages - 1 - (2x) inwards at - 3 -.
- When installing, insert linkages - 1 - (2x) at gear wheel so that projection at - 3 - is approx. 5 mm.