Edge Molding, Removing and Installing

Edge Molding, Removing And Installing







NOTE: Side window does not have to be removed to remove edge molding.

1 - Pop rivets (11x)
2 - Edge molding
- B-pillar trim removed
- Door seals in vicinity of roof edge molding detached

- Drill out heads of pop rivets - 3 - and knock out rivet shanks.
- Carefully pry edge molding out of securing clips - 3 - (3x) and remove.

CAUTION: Do not bend or twist roof edge molding, otherwise it will be visibly damaged.

3 - Securing clips
- Qty. 3