Output Diagnostic Test Mode (Function 03)

Output Diagnostic Test Mode (DTM)

NOTE:
- The Output Diagnostic Test Mode (DTM) may only be performed while the vehicle stationary and the engine is not running.
- Any DTCs identified by the output diagnostic test mode must be traced and repaired.

The Output Diagnostic Test Mode (DTM) activates the triggering of the anti-theft alarm.

NOTE: No ATWS-alarm can be triggered via this output DTM. To trigger an ATWS-alarm, perform Output Diagnostic Test Mode (DTM) for the Central Locking Control Module or a function test. Function Test of Interior Monitoring