Right Flange Shaft Seal

Right Flange Shaft Seal

• Automatic transmission clean working conditions, refer to => [ Clean Working Conditions ] Clean Working Conditions.

• General repair instructions, refer to => [ General Repair Information ] General Repair Information.

Special tools, testers and auxiliary items required

• Extractor Lever (VW 681)

• Thrust Piece (T10138)

Removing

- Remove the right flange shaft. Refer to => [ Right Flange Shaft ] Right Flange Shaft.





- Remove flange shaft seal.

Installing

- Coat outer edge of shaft seal with axle oil.

- Drive in new shaft seal as far as stop without tilting it.





• Installed position: The open side of the shaft seal faces the transmission.

- Fill the space between the sealing and dust lip half way with sealing grease (G 052 128 A1).

- Install the right flange shaft. Refer to => [ Right Flange Shaft ] Right Flange Shaft.

- Check the axle oil level in the front final drive. Refer to => [ Separate or Combined Oil Systems, Differentiation ] Separate or Combined Oil Systems, Differentiation.