Gear Oil Cooler and Lines, Transmission With Combined Oil System Overview

Gear Oil Cooler and Lines, Transmission with Combined Oil System Overview

• Follow all applicable disposal regulations.

• Automatic transmission clean working conditions, refer to => [ Clean Working Conditions ] Clean Working Conditions.

• General repair instructions, refer to => [ General Repair Information ] General Repair Information.






1 Bolt

• 10 Nm

2 Axle Oil Cooler

• After removing axle oil cooler, fill transmission with axle oil => [ Transmissions with Combined Oil Systems, Filling after Repair ] Transmissions With Combined Oil Systems, Filling After Repair

3 O-ring

• Always replace

4 O-ring

• Always replace

5 Bolt

• 8 Nm

6 Bolt

• 8 Nm

7 Bracket

8 Line

• Return line to transfer case

• After removing line, fill transmission with axle oil, refer to => [ Transmissions with Combined Oil Systems, Filling after Repair ] Transmissions With Combined Oil Systems, Filling After Repair

9 Bolt

• 8 Nm

10 Bolt

• 8 Nm

11 Line

• From transfer case to axle oil cooler

• After removing line, fill transmission with axle oil, refer to => [ Transmissions with Combined Oil Systems, Filling after Repair ] Transmissions With Combined Oil Systems, Filling After Repair

12 Bolt

• 8 Nm