Rear Interior/Reading Lamps With Rear Roof Module Control Head, From 09.07

Roof Trim Lamps and Switches

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Rear Interior/Reading Lamps with Rear Roof Module Control Head, from 09.07

Special tools, testers and auxiliary items required

• Pry lever (80 - 200)

Removing





- Carefully pry the interior/reading lamp - 1 - out using the (80 - 200) - arrow - as shown in the illustration.

- Press retainer tab - 1 - at multi-pin connector.





- Unclip securing bracket of connectors - arrow - and disconnect connectors.

Installing

Install in reverse order of removal, observing the following:

- Insert rear interior lamp/reading lamp into roof trim and clip in.