Steering Column Adjustment Switch

Instrument Panel Lamps and Switches

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Steering Column Adjustment Switch

Special tools, testers and auxiliary items required

• T8 screwdriver (T40056 A)

Removing


Follow safety precautions when working on knee airbag.

- Remove driver's storage compartment.

- Adjust steering wheel downward and to rear as far as possible, use entire adjustment range of steering column adjustment for this.

- Remove bolts - 3 - and - 4 - using (T40056 A).





- Remove the TORX bolts - 5 -.

- Disconnect upper trim - 2 - for steering column switch from lower trim - 1 - and remove both sections.

- Disconnect electrical harness connector at lower trim.

• Steering wheel has been removed in illustration.

- Remove screws - arrows -.





- Remove steering column adjustment switch (E167) - item 1 - upward from bottom trim.

Installing

Install in reverse order of removal, observing the following:

- Install driver's storage compartment.

Tightening Specifications