Diagram 33/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Camshaft Position (CMP) Sensor, Camshaft Position Sensor 3, Evaporative Emission (EVAP) Canister Purge Solenoid Valve, Fuses





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G40 - Camshaft Position (CMP) Sensor Engine Management Systems Locations

G300 - Camshaft Position Sensor 3 Engine Management Systems Locations

J623 - Engine Control Module (ECM) Control Modules Overview

N115 - Evaporative Emission (EVAP) Canister Purge Solenoid Valve Locations

SC5 - Fuse 5 (on fuse panel C) Fuse Overview

SC6 - Fuse 6 (on fuse panel C) Fuse Overview

SC7 - Fuse 7 (on fuse panel C) Fuse Overview

SC28 - Fuse 28 (on fuse panel C) Fuse Overview

SC29 - Fuse 29 (on fuse panel C) Fuse Overview

SC31 - Fuse 31 (on fuse panel C) Fuse Overview

T17e - 17-Pin Connector, red, in E-Box plenum chamber

T40 - 40-Pin Connector, black, on Engine Control Module

T81 - 81-Pin Connector, black, on Engine Control Module

(220) - Sensor Ground Connection (in engine compartment wiring harness)

(B146) - Plus Connection 1 (87) (in interior wiring harness)

(B281) - Plus Connection 5 (15a) (in main wiring harness)

(E16) - Plus Connection (5 Volts) (in Motronic Multiport Fuel Injection (MFI) wiring harness)

Previous Diagram 33/7 (Tracks 71-84)

Next Diagram 33/9 (Tracks 99-112)