Diagram 33/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Knock Sensor (KS) 1, Knock Sensor (KS) 2, Engine Coolant Temperature (ECT) Sensor, Engine Speed (RPM) Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G28 - Engine Speed (RPM) Sensor Engine Management Systems Locations

G61 - Knock Sensor (KS) 1 Engine Management Systems Locations

G62 - Engine Coolant Temperature (ECT) Sensor Engine Management Systems Locations

G66 - Knock Sensor (KS) 2 Engine Management Systems Locations

J623 - Engine Control Module (ECM) Control Modules Overview

T3o - 3-Pin Connector, black, on knock sensor 1

T3p - 3-Pin Connector, grey, on knock sensor 2

T40 - 40-Pin Connector, black, on Engine Control Module

(220) - Sensor Ground Connection (in engine compartment wiring harness)

(D90) - RPM Signal Connection (in engine compartment wiring harness)

(D106) - Connection 4 (in engine compartment wiring harness)

(E16) - Plus Connection (5 Volts) (in Motronic Multiport Fuel Injection (MFI) wiring harness)

* - Running change in production

Previous Diagram 33/6 (Tracks 57-70)

Next Diagram 33/8 (Tracks 85-98)