Backrest Ventilation

Individual Power Rear Seats

Backrest Ventilation

• Rubber guide - 3 - is sewn onto upholstery - 4 -. If rubber guide is malfunctioning, the upholstery must be replaced.





1 Rivets (Qty. 2)

2 Seat ventilation

• Removing

- Remove seat pan => [ Seat Pan ]. Seat Pan

- Remove individual rear seat => [ Individual Rear Seat ]. Individual Rear Seat

- Remove connector - 3 -.

- Drill out rivets - 1 - (Qty. 2).

- Remove seat ventilation - 2 -.

• Installing

- Install seat ventilation - 2 - in reverse order of removal.

3 Connector

4 Upholstery

5 Rubber guide