Rear Seat Backrest Heating Element, Removing and Installing

Rear Seat Backrest Heating Element, Removing And Installing

NOTE: Rear seat backrest heating element is stitched to cover. Cover must be replaced if heating element is defective.

Removing
- Remove rear seat bench.
- Remove rear seat backrest
- Attach Seat repair stand VAS 6136 to Engine and transmission holder VAS 6095.
- Attach rear seat to Seat repair stand VAS 6136.
- Remove cover and padding of rear seat backrest.

Installing
- Replace cover with backrest heating element.
- Rest of installation is reverse of removal