Rear Door Window Glass: Service and Repair

Door Window

- Door trim removed

- Drive down window to distance - a - is approx. 10 cm and secure against falling off with adhesive tape.





- Remove window regulator motor.

- Remove plastic covers - 1 - from assembly carrier - 2 -.





- Remove Torx(R) bolts - 4 -.





- Remove window regulator motor.

- Slide driver - 3 - of window regulator downward by hand.

- Disconnect all electrical harness connectors.

- Remove assembly carrier => [ Assembly Carrier ] Assembly Carrier.

- Remove window frame => [ Window Frame and Window Regulator ] Window Frame and Window Regulator.

- Pull door window downward out of guides..

- Installation is performed in the reverse order of removal.