Front Parking Aid Sensor, With Single Frame Grille

Parking Aid

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Front Parking Aid Sensor, with Single Frame Grille

Removing





- Remove bumper cover.

Inner Sensor

- Disconnect electrical connectors - 2 - and - 4 -.

- Remove screws - arrows -.

- Remove single frame cooler grille - 3 - on bumper cover.

- Press parking aid sensor - 1 - and - 5 - out of single frame radiator grille.

Outer Sensors





- Disconnect electrical harness connector - 1 - at sensor.

- Press both catches - arrows - to the side and press the sensor inward from the outside.

Installing

Install in reverse order of removal, observing the following:

Inner Sensor

- Install bumper cover.

Tightening Specifications