Rear Window Wiper Arm, Removing and Installing

Rear Window Wiper Arm, Removing And Installing

Removing
- Switch on ignition.
- Actuate rear wiper and allow wiper arm to move to end position.

CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.







- Carefully pry cap apart slightly - arrows - and lift off.







- Carefully detach spray jet - 2 -.
- Loosen nut - 1 - (do not remove).
- Loosen wiper arms from wiper shaft by tilting slightly, remove nut and remove wiper arm.

Installing
Install in reverse order of removal, noting the following:
- Adjust wiper arm.


Component Nm
Nut for wiper arm 12