Headlamp Washer Spray Jets, Removing and Installing - Through 10.04

Headlamp Washer Spray Jets, Removing And Installing - Through 10.04

CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.

Removing
- Remove front bumper cover.







- Pull cover of spray jet upwards away from bumper cover and carefully disengage retainers - arrow -.







- Press release button and pull off fluid hose - 3 -.
- Remove screws - 1 - and - 2 - and detach spray jet.

Installing
Install in reverse order of removal, noting the following:
- Install front bumper cover.

Tightening torque

Component - fastener Nm
Spray jet to bumper cover - screw 3