Shift Interlock Solenoid: Service and Repair

Shift Lock Solenoid -N110-, removing and installing, 01V, 5 SPD. A/T AWD
Removing
- Remove shift mechanism cover.
- Disconnect electrical harness connector on Shift Lock Solenoid -N110-.





- Release lugs and remove selector lever lock solenoid forward (arrows).

Installing
Installation is reverse of removal, noting the following:





- Press selector lever lock solenoid into guide until it engages; actuating lever -2- of solenoid must engage in locking lever -1- on shift mechanism.
- Install shift mechanism cover.