Turn Signal/Parking Lamp Bulb, Replacing - Through 10.04

Turn Signal/parking Lamp Bulb, Replacing - Through 10.04

Removing
- Remove headlamp.







- Turn bulb holder - arrow - counter-clockwise and remove from housing.
- Pull bulb out of bulb holder.

Installing
Install in reverse order of removal, noting the following:

CAUTION:
- Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the bulb during operation can cause the glass to cloud over.
- When installing housing cover, ensure proper seating. Water intrusion will damage headlamp.

- Fit new bulb in housing.
- Install headlamp.