Turn Signal Bulb, Replacing - From 11.04

Turn Signal Bulb, Replacing From 11.04

Removing

Left headlamp
- Remove washer fluid reservoir.

Right headlamp
- Lift vehicle.
- Remove right front wheel.







- Remove screws - arrows -
- Remove forward portion of wheel housing liner.







Continuation for all:
- Turn bulb holder - 3 - counter-clockwise - arrow - and pull out from housing.
- Screw bulb out of holder.

Installing
Install in reverse order of removal, noting the following:

CAUTION:
- Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the bulb during operation can cause the glass to cloud over.
- When installing bulb holder, ensure proper seating. Water intrusion will damage headlamp.

- Fit new bulb in bulb holder.
- Markings -1 - and - 2 - must be opposite each other when inserting bulb holder into housing.

Left headlamp
- Install washer fluid reservoir.

Right headlamp
- Install wheel housing line.