Taillamp/Rear Fog Lamp Bulb, Removing and Installing

Taillamp/rear Fog Lamp Bulb, Removing And Installing

Removing
- Turn light switch to position "O".

CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.







- Unclip plug -1 - from luggage compartment trim - arrow - using a small screwdriver.







- Remove nut - 1 - and detach retainer bracket.
- Remove bulb holder - 2 - from housing (press apart retaining tabs - arrows -).
- Screw bulb out of bulb holder.

Installing
Install in reverse order of removal, noting the following:
- Insert new bulb in bulb holder.

Tightening torque

Component - fastener Nm
Retainer bracket to housing - nut 3.5