Signal Horn/Dual Tone Horn H1 - Removing and Installing - From 11.04

Signal Horn/Dual Tone Horn H1 - From 11.04, Removing And Installing

Removing
Vehicles without charge air cooler:







- Release fasteners -1 - and - 2 - and remove front noise insulation.

Vehicles with charge air cooler:
- Remove front bumper cover.







All models:
- Disconnect electrical connection - 3 -.
- Remove nut -1 - and detach horn - 2 - from retainer.

NOTE: Illustration shows bumper removed for clarity.

Installing
Install in reverse order of removal, noting the following:

Vehicles with charge air cooler:
- Install front bumper cover.

Tightening torque

Component - fastener Nm
Horn to bracket - nut 5