Headlamps With High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, Assembly - From 11.04

Headlamps With High Intensity Gas Discharge (HID) "Bi-Xenon"Lamps, Assembly

NOTE:
- After performing any repairs or service that could affect headlight aim, check/adjust aim.
- Headlamp without adaptive light function (cornering lights) is illustrated.







1. Screw - 1.5 Nm
2. High intensity gas discharge (HID) lamp control module
- Left High-intensity Gas Discharge (HID) Lamp Control Module J343
- Right High-intensity Gas Discharge (HID) Lamp Control Module J344
- Removing and installing.

3. Headlamp housing
4. Screw - 6 Nm
5. Housing cover
- For parking/daytime running lamps

6. Daytime running lamp (DRL) bulb
- 12V, 21 W

7. Bulb holder
- For daytime running lamp (DRL) bulb

8. Bulb holder
- For parking lamps

9. Parking lamp bulb
- 12V, 5W

10. Screw-6 Nm
11. Housing cover
- For low beam headlamps

12. Screw-1.5 Nm
13. High intensity gas discharge (HID) lamp
- 35W, D1S

14. Bulb holder
- For turn signal bulb

15. Turn signal bulb
- 12V, 21 W
- Orange
- Replacing

16. Trim cover