Fog Lamp Housing , Removing and Installing - From 11.04

Fog Lamp Housing - Audi A4, Removing And Installing - From 11.04

Removing
- Turn light switch to position "O".

CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.

Vehicles without charge air cooler:







- Release fasteners -1 - and - 2 - and remove front noise insulation.

Vehicles with charge air cooler:
- Remove front bumper cover.

All models:







- Remove screws - arrows -.
- Disconnect electrical connection - 2 -.
- Remove fog lamp housing -1 -.

Installing
Install in reverse order of removal, noting the following:

Vehicles with charge air cooler:
- Install front bumper cover.

All models:
- Check and adjust fog lamps if necessary.

Tightening torque

Component - fastener Nm
Fog lamp housing to bumper cover - screw 6