Fog Light Bulbs, Replacing - Through 10.04

Fog Lamp Bulb, Replacing - Through 10.04

Removing
- Remove fog lamp assembly.







- Disconnect electrical connection -1 - at bulb.
- Turn bulb counter-clockwise - arrow - and remove from housing.

Installing
Install in reverse order of removal, noting the following:

CAUTION:
- Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the bulb during operation can cause the glass to cloud over.
- When installing housing cover, ensure proper seating. Water intrusion will damage headlamp.

- Insert bulb and secure by turning in clockwise direction.
- Check and adjust fog lamps if necessary.