Daytime Running Lamp (DRL) Bulb, Replacing

Daytime Running Lamp (DRL) Bulb, Replacing

Removing
- Turn light switch to position "O".

CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.

Right headlamp







- Remove screws - arrows -
- Remove air ducts -1- and - 2







Both sides, continued:
- Release retaining tab - arrow - and detach housing cover for side lights from headlamp housing.







- Turn bulb holder -1 - counter-clockwise - arrow - and remove from headlamp housing.
- Screw bulb out of bulb holder.

Installing
Install in reverse order of removal, noting the following:

CAUTION:
- Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the bulb during operation can cause the glass to cloud over.
- When installing housing cover, ensure proper seating. Water intrusion will damage headlamp.

- Fit new bulb in housing.
- Secure bulb holder by turning clockwise.
- Close housing cover.