Heating and A/C Unit, Component Overview

Heating And A/C Unit, Component Overview

- Removing air conditioner.

Heating And A/C Unit







1. Heating and A/C unit
- Removing and installing heater elements and air guides.

2. Left Temperature Flap Motor V158
- With Left Temperature Flap Potentiometer/Actuator G220
- Lever color code: Red (yellow for right-hand drive vehicles)

3. Bolt
4. Left Footwell Vent Temperature Sensor G261
5. Right Footwell Vent Temperature Sensor G262

6. Cable ties
7. Bracket for wiring harness
8. "Air conditioner" wiring harness
9. Evaporator Vent Temperature Sensor G263

10. Right Temperature Flap Motor V159
- With Right Temperature Flap Potentiometer/Actuator G221
- Lever color code: dark purple

11. Central Air Flap Motor V70
- With Central Flap Motor Position Sensor G112
- Cam plate color code: White

12. Defroster Flap Motor V107
- With Defroster Flap Motor Position Sensor G135
- Lever color code: Dark green

13. Recirculation Flap Motor V113
- With Recirculation Flap Motor Position Sensor G143
- Lever color code: Blue (light blue with additional lugs for activation of fresh-air flap on right-hand drive vehicles)

14. Air Flow Flap Motor V71
- With Back Pressure Flap Motor Position Sensor G113
- Cam plate color code: Light blue

15. Lever
16. Lever
17. Fresh Air Blower Control Module J126 and Fresh Air Blower V2
- The Fresh Air Blower V2 contains the Fresh Air Blower Control Module J126 as an integral component which cannot be replaced separately.

18. Fresh Air Intake Duct Temperature Sensor G89