Compressor Drive Shaft, Loosening and Tightening

Compressor Drive Shaft, Loosening And Tightening

NOTE:
- Extensive preparation is required before compressor drive shaft can be removed (removing compressor).
- Drive shaft can also be checked and tightened without opening refrigerant circuit.

Drive shaft, loosening
- Remove components preventing access to drive shaft(removing compressor).







- Use open-ended wrench to hold compressor drive shaft - A - in position and turn compressor drive unit - B - in direction of arrow - C -.

NOTE:
- Drive shaft -A- must not be turned.
- After loosening threaded connection, drive shaft -A- can be pushed through socket - E- into drive pinion.
- After installing drive shaft - A -, check installation position of boot - E -.

Drive shaft, tightening
- Use open-ended wrench to hold compressor drive shaft - A - in position and turn compressor drive unit - B - in direction of arrow - D - (tightening torque 60 Nm).
- After tightening compressor drive shaft, check installation position of socket - E -.