Motor For Seat Tilt Adjustment, Removing and Installing

Motor For Seat Tilt Adjustment, Removing And Installing

Special tools, testers and auxiliary items required







- Torque wrench V.A.G 1410







- Engine and transmission holder VAS 6095







- Fixture for seat repair VAS 6136







1 - Seat angle adjustment motor

- Removal
- Remove seat.
- Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.
- Attach the front seat to the fixture for seat repair VAS 6136.
- Remove bolts - 2 - (Qty. 4).
- Remove screw - 3 -.
- Remove connector - 4 -.
- Remove motor for seat tilt adjustment - 1 -.

- Installing
Installation is reverse of removal.
2 - Screw
- 12 Nm
- Qty. 4
3 - Screw
- 20 Nm
- Replace
- Threaded holes for screws must always be cleaned (for example, with thread cutter)
4 - Connector